Installation/Update From The Edc Server - Ricoh M0A0 Service Manual

3.System Maintenance
restarts.
When Installation/Update Is Prohibited
If [Prohibit] is selected for [Update Firmware] in [System Settings], the execution key is grayed out and
installation/update cannot be executed.
When trying to update from a PC, updating fails and the result is recorded as "Failed".

Installation/update from the eDC Server

Downloads applications from the eDC Server, and installs or updates them.
This method is mainly for paid applications. A product key is required when an application is installed for the first time.

Installation/activation/update of applications from the server can only be done in the service mode.
Check Server Connect
1.
Log in to the control panel's service mode.
2.
Select [Apps] > [Install].
3.
Press [Check Server Connect] and make sure that "Connect Server Succeeded!" is displayed.

The server address is stored in the firmware of the Smart Operation Panel.

To connect to the server, the network settings of the MFP must be configured correctly. For the required
configuration, see the Field Service Manual of the MFP.

If server connection fails, see
Installation
1.
Log in to the control panel's service mode.
2.
Select [Apps] > [Install].
3.
Select [Install from Server].
54
Troubleshooting for error codes.