User Authentication For Specific Mfp Applications - Ricoh M0A0 Service Manual

4.Appendices: Software Configuration
Bit 7 = 1
As Bit 1 = 1 is the most restrictive of the three, it will take presedence over the other two and only administrators will be
able to access the DS via WIM.

In order for SP5-885-020 to have any effect, the Document Server must be enabled (SP5-967-001=0). For
information about SP5-967-001, refer to Disabling the Document Server using System SP5-967-001 and
Printer SP1-006-001.

Access to the entire "Job" menu can be restricted using SP 5-888-001. For details, refer to Use of SP 5-888-
001 to restrict access to the "Job" menu on WIM.

User Authentication for Specific MFP Applications

The SP5-420 settings enable/disable User Authentication for specific MFP applications.
SP 5-420 User Authentication Value (Default: 0)
SP 5-420
SP5-420-001
SP5-420-011
SP5-420-021
SP5-420-031
SP5-420-041
1.
Enable User Authentication for the device as a whole:
User Tools > System Settings > Administrator Tools > User Authentication Management
2.
Use the SP5-420 settings to specify the applications to which User authentication is to apply.
188
User Authentication
Copy
Document Server
Fax
Scanner
Printer
Value (Default: 0)
0 (ON) 1 (OFF)