Table of Contents
Advertisement
Set-up instructions
7.14 Sewing test
Carry out a sewing test before starting up the machine. Adjust the
machine to the requirements of the material to be sewn.
To do this, read the corresponding sections of the operating
manual. Read the corresponding sections in the service instruc-
tions to change the machine settings if the sewing result does not
meet the requirements.
Carrying out the sewing test
1. Insert the needle.
2. Wind on the hook thread.
3. Insert the hook thread reel.
4. Thread in the hook thread.
5. Thread in the needle thread.
6. Adjust the thread tension to the material to be sewn.
7. Adjust the thread regulator to the material to be sewn.
8. Adjust the sewing foot pressure to the material to be sewn.
9. Adjust the sewing foot stroke to the material to be sewn.
10. Adjust the stitch length.
11. Start the sewing test at low speed.
12. Increase the sewing speed continuously until the working speed
Operating manual 567 Version 01.0 - 01/2015
WARNING
Risk of injury by the needle point and moving
parts
Switch off the sewing machine before replacing the
needle, inserting the thread, inserting the hook
thread reel, or adjusting the hook thread tension
and the thread regulator.
is reached.
67
Advertisement
Table of Contents
