About this manual
1 About this manual
1.1 Scope of application of the manual
This manual describes the intended use and the set-up of the special
sewing machine 567.
It applies to all submodels listed in Section 3 Performance descrip-
tion.
1.2 Applicable documentation
The device contains built-in components of other manufacturers,
e.g. drive motors. The corresponding manufacturers have performed
a hazard assessment for these purchased parts and confirmed com-
pliance of the design with the European and national specifications.
The intended use of the built-in components is described in the
corresponding manuals of the manufacturers.
1.3 Damage during transport
Dürkopp Adler cannot be held liable for any damage during transport.
Check the delivered product immediately after receiving it. Report any
damage to the last transport manager. This also applies if the pack-
aging is not damaged.
Keep the machines, devices and packaging material in the condition
they were at the time when the damage was identified. That secures
any claims towards the transport company.
Report all other complaints to Dürkopp Adler immediately after receiv-
ing the product.
1.4 Limitation of liability
All information and notes in this operating manual have been compiled
in accordance with the latest technology and the applicable standards
and regulations.
The manufacturer cannot be held liable for any damage due to:
•
•
•
•
•
•
Operating manual 567 Version 01.0 - 01/2015
Failure to observe the manuals
Improper use
Unauthorized modifications to the machine
The deployment of untrained personnel
Damage during transport
Using spare parts not approved
3