Planet Networking & Communication ADE-4400v3 User Manual page 57

IPSec VPN Example
In this example, 2 LANs are connected via IPSec VPN. Each end has an ADW-4401v4.
Note
• The LANs MUST use different IP address ranges.
• Both endpoints have fixed WAN (Internet) IP addresses.
IPSec Settings of ADW-4401 Site A:
Step 1. Enable the VPN, it needs to take several minutes.
Step 2. Enter a Name for this connection.
Step 3. Enter the Local public IP as "203.73.50.242".
Step 4. Enter the Remote public IP as "61.62.236.12". (ADW-4401-B WAN IP)
Step 5. Enter the Local private IP as "192.168.1.0/24".
Step 6. Enter the Remote private IP as "192.168.10.0/24". (Site B Subnet)
Step 7. Enter the PSK Key as "123456789", it must match with ADW-4401-B.
Step 8. Click "Add" to add this VPN connection.
Step 9. Click "listen" to wait remote site for connection.
57