Routing; Rip - Planet Networking & Communication ADE-4400v3 User Manual

3.6.4 Routing

You have two ways to manage the device's routing information. It includes RIP and Static
Route.

3.6.4.1 RIP

Enable the RIP if you are using this device as a RIP-enabled router to communicate with
others using the Routing Information Protocol. This page is used to select the interfaces on
your devices that use RIP, and the version of the protocol used.
To activate RIP for the device, select the "Enabled" radio button for RIP Mode and click
"Apply Changes" to apply it.
To configure an individual interface, select the Interface, desired RIP version and Send
mode. Click the "Add" button to save the configuration, and to start or stop RIP based on
the Global RIP mode selected.
51