Planet Networking & Communication ADE-4400v3 User Manual page 40

1. Open the WEB page at "WAN
2. Select the Channel Mode to "1483 MER". Set the value of VPI / VCI and select the
Encapsulation mode from your ISP.
3. Select the WAN IP type: DHCP or Fixed IP.
4. Select Fixed IP to set static IP information. You will need to enter in the IP address,
subnet mask, and gateway address provided to you by your ISP. Each IP address
entered in the fields must be in the appropriate IP form, which are 4 IP octets
separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in
this format.
5. Select DHCP if your ISP provides you an IP address automatically. The router will
obtain an IP address automatically.
6. Click "Add" button to add this channel. You can use the "Modify" and "Delete"
button to manage your PVC.
7. Go to "Admin
The device will reboot and apply this setting
WAN Interface".
Commit/Reboot" menu, clink "Commit and Reboot" button.
40