Planet Networking & Communication ADE-4400v3 User Manual page 14

Rear Panel Port and Button Definition
Connector Description
POWER The power button is for turn on or turns off the router.
Button
The reset button can restore the default settings of device. To restore factory
Reset defaults, keep the device powered on and push a paper clip into the hole.
Press down the button over 5 seconds and then release.
Power Power connector with 12V DC 1.0 A
Router is successfully connected to a device through the corresponding port
Ethernet
(1, 2, 3, or 4). If the LED is flashing, the Router is actively sending or receiving
1-4
data over that port.
The RJ-11 connector allows data communication between the modem and the
Line
ADSL network through a twisted-pair phone wire.
14