Adsl Settings - Planet Networking & Communication ADE-4400v3 User Manual

SCR: Sustained Cell Rate (SCR) is the mean cell rate of a bursty, on-off traffic source that
can be sent at the peak rate, and a parameter for burst-type traffic. SCR may not be greater
than the PCR; the system default is 0 cells/sec.
MBS: Maximum Burst Size (MBS) is the maximum number of cells that can be sent at the
PCR. After MBS is reached, cell rates fall below SCR until cell rate averages to the SCR
again. At this time, more cells (up to the MBS) can be sent at the PCR again.
"Apply Changes": Set new PVC QoS mode and values for the selected PVC.
"Undo": Discard your settings.

3.5.3 ADSL Settings

You can set ADSL connect mode here. It supports G.Lite, G.Dmt, T1.413, ADSL2 and
ADSL2+. You can also set Annex L, M Option, ADSL Capability and ADSL Tone Mask in
this page.
42