(And Muting Outputs); Recalling A Preset; Viewing Ties - Extron electronics DTP CrossPoint 4K Series Setup Manual

4.
Press and release the desired output buttons.
Amber indicates video and audio tie.
Green indicates video only tie.
Red indicates audio only tie.
5.
Press and release the
off.

Recalling a Preset

A "preset" is a coniguration of ties and DSP audio settings
that has been stored using the DSP Conigurator or Product
Coniguration Software. Presets 1 through 18 (10x8 and 8x6 matrix
sizes) or 12 (8x4 and 8x2 matrix sizes) are selectable from the front
panel, using the input and output buttons.
1.
Press and release the
All input and output buttons with assigned presets light red.
2.
Press and release the input or output button for the desired
preset.
3.
Press and release the

Viewing Ties

1.
Press the
have no ties established.
2.
Press an input button. The buttons for all tied outputs light.
3.
Press an output button. The buttons for the tied input and all
tied outputs light.
4.
Press the
output buttons return to an unlit state.
18 DTP CrossPoint 4K Series • Front Panel Operations
3 4
PRESET
Press and release.
1 2 3 4
The button blinks red to indicate
that this preset is selected to recall.
The Enter button blinks red to indicate
1
ENTER
the need to activate the recall.
button. Output buttons light for outputs that
View
button again to exit View mode. All inputs and
View
Green indicates the need
8
ENTER
to confirm the change.
button. All button indicators turn
Enter
button.
Preset
PRESET
The Preset button lights.
5 6 7
button.
Enter