Remote Control Operation - Tecsun S-8800 Operation Manual

3

REMOTE CONTROL OPERATION

Infrared (IR) transmitter (top)
30
Power
29
Press to turn on/off the device.
49 DISPLAY
Radio ON mode: Press to display
either the frequency or clock time
on the LCD.
48 M (MEMORY)
Press to display the Station Memory
Location, or press to store the station
into memory.
47 BACK
Set your desired temporary preset
station, then continue tuning into
other stations. At any time, press
[BACK] to return to the temporary
preset station.
46 TUNING
Adjust the frequency or select a
stored station memory location
(in VM mode only).
VF/VM
45
In radio ON mode, press to switch
between the View Frequency (VF)
and View Memory (VM) modes.
44
SCAN
In VF mode, press and hold to scan
all available stations in the selected
frequency band. In VM mode, press
and hold to scan all available stored
stations in the selected frequency band.
43 AM NORM. / FM ST.
-
In SSB mode: Press to return to
LW/MW/SW reception.
- In FM mode: Press to select
FM mono or stereo.
42 USB/LSB
While receiving LW/MW/SW signals, press to
select USB or LSB mode.
41 SW- / SW+
Radio ON mode:
- Press to select the SW band, press again to change
SW meter band.
- Press and hold to automatically tune into stations and
store them into memory (ATS).
DELETE
DISPLAY ALL
1 2
4 5
7 8
M 0
MEMORY
FINE TUNE
TUNING
VF
VM
SCAN
FINE TUNE
FM ST.
USB LSB / AM NO M. R
ATS
SW SW MW
METER BAND 9/10kHz
TECSUN
RM-007
Battery compartment (back side)
40
Requires 2pcs AAA size battery
※ Don't press!
Water ingression prevention only.
Sleep timer setting
31
Turn on the radio, press repeatedly
to select your desired auto turn off timer
(1 to 120 minutes).
DELETE
32
- ALL: In VM mode, select desired frequency
- ONE: In VM mode, select desired frequency
ONE
3
Multifunctional numeric keys
33
6
-
Frequency input (VF mode)
- Memory location input for stored stations
9
(VM mode)
34 ENTER
Press to confirm setting.
ENTER
VOL
Auto sorting memory ( "0" key)
35
Volume
36
- VOL
- VOL
VOL
AM BW
AM BW bandwidth filter
37
FM
Select the frequency band (LW/MW/SW), then
FM SET
press repeatedly to apply the desired
bandwidth filter.
- AM mode: 2.3kHz / 3kHz / 4kHz / 6kHz
- SSB mode: 0.5kHz / 1.2kHz / 2.3kHz / 3kHz
/
38 FM FM SET
-
Radio OFF mode: Press and hold to select your
- Radio ON mode: Press to select FM band, or
39 MW / 9/10kHz
-
Radio OFF mode: Press to select 9kHz or 10kHz MW
- Radio ON mode: Press to select MW band, or press
band, then press and hold to activate
delete function, press again to confirm.
band, press and hold to activate
delete function, press again to confirm.
Increase volume level
:
signal level
Decrease volume level / line out
:
signal level
/ 4kHz
desired FM frequency range.
press and hold to automatically
tune into stations and store
them into memory (ATS).
tuning steps.
and hold to automatically tune into
stations and store them into memory
(ATS).
/ line out
4