Display & Backlight Features; Return To Previous Station - Tecsun S-8800 Operation Manual

24 DISPLAY & BACKLIGHT FEATURES
DISPLAY
While listening to the radio:
i) Press the [DISPLAY] button
time "00:00 AL" or memory location "PXXX" (only in VM mode) in the top right
corner of the LCD.
ii) Press the [TIME] button
clock time.
iii) Press the [DISPLAY] button
frequency or clock time.
Note:
When the LCD display is set to clock time, press the [POWER] button twice to turn
off the radio.
Backlight
This device has an intelligent backlight function, meaning that the backlight is lid for
about 5 seconds after operating any key or knob. To turn on the backlight
continuously, turn off the radio, then press and hold the [3] key on the remote control
until "ON" appears on the LCD. Press and hold again to switch back to intelligent
lighting function.
25

RETURN TO PREVIOUS STATION

This feature is used to quickly switch between two
stations (not limited to a single frequency band).
Tune to your desired station-A, then press and hold
the [BACK] button
it as the "return station". When tuning other frequencies,
press the [BACK] button at any time to return to the stored station-A.
27
on the radio to display the clock time "00:00", alarm
on the radio to display either the station frequency or
on the remote control to show either the station
on the remote control to store