Using The Device; Turning The Device On/Off; Volume Control; Vf (View Frequency) And Vm (View Memory) - Tecsun PL-368 Manual

USING THE DEVICE

Turning the device on/off: Quick press the [ POWER ] button.
Volume control: Rotate the [ VOLUME ] knob upwards or downwards to
select your desired volume level.

VF (View Frequency) and VM (View Memory)

VF: VF mode is used when searching for new radio signals. Press the
[ VF/VM ] button. When the frequency indicator flashes twice, the VF
mode is activated.
VM: VM mode is used for looking up stations that have been stored into
the memory. Press the [ VF/VM ] button. When the preset memory
location indicator on the display flashes three times, the VM mode is
activated.

Using the Radio's Antennas

FM / Shortwave (SW): When listening to FM or shortwave radio, extend
the antenna and adjust its length and direction in order to get the
optimum reception.
Medium Wave (MW) / Long Wave (LW):
This radio uses an internal ferrite bar antenna to receive medium wave
and long wave broadcasts, the quality of which can be enhanced by
changing the position and direction of the device. You may also choose
to connect the external MW/LW ferrite bar antenna to the
[ LW/MW ANTENNA ] socket (3.5mm). Once inserted, rotate the antenna
in order to get the optimum reception.
8