Summit X440-24X-10G Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Chapter 1: Summit Family Switches

Summit X440-24x-10G Switch

The front panel of the Summit X440-24x-10G switch
24 unpopulated SFP ports (ports 1–24) that provide 24 Gbps of fiber connectivity. The SFP ports
●
support both 100BASE-FX and 1000BASE-X optical modules.
Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
Four autosensing 10/100/1000BASE-T ports (ports 21–24) that provide 4 Gbps of high-density
●
copper connectivity.
These ports are implemented as shared ports that pair a copper port with a fiber port. For more
information about combination ports, see
Two unpopulated SFP+ ports (ports 25 and 26) that provide 20 Gbps of fiber connectivity
●
Ethernet management port
●
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local
●
management
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page 77.
Figure 47: Summit X440-24x-10G Switch Front Panel
1
x
4 5
1 = Ethernet management port
2 = SFP ports
3 = 10/100/1000BASE-T ports
4 = Stack number indicator
The rear panel of the Summit X440-24x-10G switch
Redundant power input connector for optional connection to the EPS-C2 External Power Module
●
The connecting redundant power supply cable is shipped with the power module unit. See
"Installing an EPS-C2 Chassis" on page 322
AC power input socket
●
The internal AC power supply operates from 100 VAC to 240 VAC.
68
"Combination Ports and Failover" on page
2
3
6
5 = Console port
6 = Combination ports
7 = SFP+ ports
(Figure 43) includes:
"Combination Ports and Failover" on page
"Summit X440 Series Switch LEDs" on
7
(Figure 44) includes:
for more information.
Summit Family Switches Hardware Installation Guide
22.
22.