Extreme Networks Summit X150 Series Hardware Installation Manual page 274

Chapter 6: Installing Summit Family Switches
d Tighten both screws on the terminal block to 7 inch-pounds (0.99 Newton meters)
3 Snap the cover into place over the terminal block
Figure 220: Connecting the DC Power Cables (Part 2)
-48V
4 Connect the cables to the DC source voltage, using hardware appropriate to the installation site and
following local and national electrical codes.
5 Energize the DC circuit.
274
(+)
(–)
(Figure 220).
RTN
SH_162
Summit Family Switches Hardware Installation Guide
(Figure 220).