Summit X750-32Q Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit X750-32q Switch

The front panel of the Summit X750-32q switch
32 40-Gigabit Ethernet ports capable of supporting passive copper QSFP+, and active fiber QSFP+.
●
With quad fan out SFP+ cables, 24 of the 32 ports can each be divided into four 10-gigabit data lanes
for a total of 104 10-Gigabit ports. Groups of two or four ports are configurable to be stacking ports.
For information about QSFP+ optical modules, see the Extreme Networks Pluggable Interface Modules
Installation Guide.
For information about stacking, see
10/100/1000-Mbps management port
●
USB port for access to external storage
●
RJ-45 RS-232c serial console port used to connect a terminal and perform local management
●
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page 134.
Stack number indicator
●
Figure 111: Summit X750-32q Front Panel
1
3
9 12 17
2 5
1 = USB port
2 = Stack number indicator
3 = Management port
The rear panel of the Summit X750-32q switch
Five replaceable fan modules
●
Two power supply bays for either AC or DC power supplies (see
●
Power Supplies" on page
Two mini-BNC connectors labeled OUT for connecting a Building Integrated Timing Supply (BITS)
●
or GPS timing source.
- 1 PPS frame output
- 10 MHz output
Summit Family Switches Hardware Installation Guide
Chapter 5, "Building a SummitStack Configuration"
20 25 28 33 36 41 44 49
50
45 46 47 48
4 = 40G/10G QSFP+ Ethernet ports
5 = Console port
6 = Stacking ports
153)
(Figure 111) includes:
"Summit X750 Series Switch LEDs" on
4
51 53 56 61 64 69
52
57 58 59 60 65 66 67 68 73 74
(Figure 112) includes:
Summit X750 Series Switches
72 77 80 85 88 93 96 101
102
75 76 81 82 83 84 89 90 91 92 97 98 99 100
"Summit 550-Watt AC and DC
103
104
6
133