Summit X750 Series Switch Leds - Extreme Networks Summit X150 Series Hardware Installation Manual

Chapter 1: Summit Family Switches
Figure 112: Summit X750 Rear Panel
4
1 = Fan modules
2 = Power Supply Unit

Summit X750 Series Switch LEDs

Table 36 describes the LEDs on the Summit X750 series switches.
Table 37: LEDs on the Summit X750 Series Switches
Label or Type
Front Panel LEDs
M (Management)
FAN
1, 2, 3, 4, 5
P1, P2
(Power Supply)
Ethernet Ports 40G mode
1, 5, 9, 13, 17, 21, 25, 29,
33, 37, 41, 45, 49, 50 51,
52, 53, 57, 61, 65, 69, 73,
77, 81, 85, 89, 93, 97,
101, 102, 103, 104
Ethernet Ports 10G mode
1 – 104
2-digit Stack number Indicator
Left digit (1)
134
1
3 = Blank power supply slot
4 = Timing cable connectors
Color/State
Steady green
Blinking green
Blinking amber
Off
Steady green
Blinking amber
Off
Steady green
Steady amber
Blinking amber
Off
Steady blue
Blinking blue
Off
Steady green
Blinking green
Off
Reserved for future use.
2
Meaning
Power-on self test (POST) has finished.
Normal operation
POST in progress
POST failed.
No external power is attached.
Normal operation
Failure
No power
Normal operation
Power is attached, but no power is on.
Power failure
No power is attached.
Link OK
Activity
No link or port disabled.
Link OK
Activity
No 10G link or port disabled.
Summit Family Switches Hardware Installation Guide
3