Assembling The Da700/Da750; Attach The Wire Frame To The Printer - Pitney Bowes ADDRESSRIGHT DA750 Operator's Manual

2 • Getting Started with the DA700/DA750 Printer
Assembling
the DA700/
DA750
(continued)
Insert the metal sheet into
the height adjustment slot.
2-6

Attach the Wire Frame to the Printer.

1. Hook the bottom edge of the wire frame under the de-
flector. The wire frame slides between the feed rollers
and the paper deflector. Make sure the front rod is en-
gaged into the key slot bottom.
2. Rotate the wire frame and insert the curved metal sheet
on the bottom of the frame into the height adjustment
slot.
3. Adjust the angle of the wire frame so it's positioned at
about a 45 degree angle. Turn the lock knob on the side
of the slide clockwise to hold the wire frame in position.
You can adjust both the height and side-to-side position
of the wire frame to accommodate the size and type of
the material you're running. We talk about this in the next
chapter.
Slide bottom edge
under here.
SV61027 Rev. D