Background Control Of Other Components - Pioneer Elite VSX-21 Operating Instructions Manual

Background Control of Other Components

The following steps show you how to control one component while listening to another. This may be useful if you want
to rewind a tape while listening to CD, etc.
RECEIVER
ENTER
VOL
CHANNEL
MULTI CONTROL
DVD/LD TV/SAT
1
VCR 1
TV CONTROL
VCR 2 RECEIVER
DSP MODE
1 2
CH.SELECT
TEST TONE
6
5
CN.LEVEL
9 0
FUNCTION DIRECT
2,3,5
MODE CHECK
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
1
Select a component, then start playback.
TV
For example:
Press FUNCTION to select the CD player, then press the CD button,and
start playing a CD. (You should hear the sound of the CD playing back.)
FQ
+
2
Press MODE CHECK to display the current operation
–
FQ
mode.
VOL
The corresponding MULTI CONTROL button lights up.
For example:
The CD button should light up to indicate that the remote is set to
CD
operate the CD player.
TUNER
MD/TAPE
MIDNIGHT
3 4
3
Press MODE CHECK repeatedly to select another
ATT SIG.SELECT
7 8
operation mode.
EFFECT
+10
MEMU
Each time you press MODE CHECK, the next MULTI CONTROL button
CLASS TV/VCR
FL DIMMER should light, enabling you to operate the selected device.
COMMANDER
SET UP
For example:
Press repeatedly to light the MD/TAPE button. The receiver's function
Î
remains set to CD (and you should still hear the CD player), but the
remote control is now set to operate the tape deck.
4
Perform the desired operation(s).
The remote control remains in the selected operation mode, so you
may perform as many operations as necessary.
For example :
Press 1 to rewind the tape.
5
Press MODE CHECK repeatedly to switch back to the
original operation mode.
You can also switch back to the original operation mode by pressing
the corresponding MULTI CONTROL button.
For example :
Press MODE CHECK repeatedly to light the CD button, or press the CD
button.
Other Operations
51
<ARB7181>