Setting Up The Remote Control - Pioneer Elite VSX-21 Operating Instructions Manual

Preparations

Setting Up the Remote Control

In addition to controlling the receiver, the supplied remote control can operate your other components (DVD, MD, VCR,
TV, LD, CD, etc.). If your component(s) are listed in the "Preset Code List" on page 56, simply recall the corresponding
preset code.
Recalling preset codes
The following steps show you how to recall preset codes for each MULTI CONTROL button. Once the preset code is
assigned, pressing the button will automatically set the remote to operate the respective component.
• Refer to "Preset Code List" on page 56 for the components and manufacturers available.
memo
• Refer to "Remote Controlling Other Components" on pages 44 to 50 and "Background Control of Other
Components" on page 51 for detailed explanations on how to operate your other components.
RECEIVER TV
FQ
+
ENTER
–
FQ
VOL VOL
CHANNEL
MULTI CONTROL
2
DVD/LD TV/SAT CD
VCR 1 TUNER
TV CONTROL
VCR 2 RECEIVER MD/TAPE
DSP MODE MIDNIGHT
1
2 3 4
CH.SELECT TEST TONE ATT SIG.SELECT
5 6 8
7
CN.LEVEL
EFFECT
9 0 +10
MEMU
CLASS TV/VCR
FUNCTION DIRECT FL DIMMER
COMMANDER
MODE CHECK
SET UP
Î
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
22
<ARB7181>
1
Press COMMANDER SET UP and 1 at the same time to
select the preset mode.
The MULTI CONTROL buttons on the remote control start to blink.
SIGNAL
SELECT
ANALOG
SIGNAL
SELECT
ANALOG
To cancel the preset mode
Press COMMANDER SET UP.
1
2
Press the MULTI CONTROL button for the component you
want to control.
Each button can be set to control one of the following components
: DVD/LD player
DVD/LD
: TV or Satellite tuner
TV/SAT
: CD player
CD
: MD recorder or Tape recorder
MD/TAPE
: Video deck
VCR 1
: Video deck
VCR 2
: TV or Cable TV tuner
TV CONTROL
The selected button lights steadily and the first manufacturer (and
preset code(s)) appear in the display.
SP A
dB
SP A
dB