Remote Control Of Other Component; Setting Up The Remote Control To Control Other Components - Pioneer VSX-D908S Operating Instructions Manual

Remote Control of Other component

Setting Up the Remote Control to Control Other
Components
In addition to controlling the receiver, the supplied remote control can operate your other components (VCR, TV,
LD, CD, etc.) after you program it to do so. In this way, instead of fumbling with many different controls and
buttons, you only need to use one remote control. If your component(s) are listed in the remote control's
memory, simply follow the steps below. If your component(s) are not listed, or if you want the remote to learn
additional operations, you can use the learning mode to input the information from the remote controls supplied
with your other components.
Recalling preset codes
The following steps show you how to recall preset codes stored in the remote control. Once a preset code is
recalled and the component assigned, you can use this remote to easily operate the component.
See "Preset Code List" on p. 79 for the components and manufacturers available.
S0URCE
MULTI
OPERATION
DVD/LD TV/SAT
MULTI CONTROL
MD/
CD
TAPE1
CLASS MPX
¶ 7
- +
TUNING
1 ¡
DTV ON/OFF DTV MENU
3
1
4
7
GUIDE
+10
TV VOL TV CONTROL
EFFECT
/CH SEL
SYSTEM
SETUP
2,3
REMOTE
MIDNIGHT
SETUP
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
50
1
Turn on your TV and the receiver.
Î
RECEIVER 1
Make sure your TV is set to the appropriate video input (e.g. VIDEO
SYSTEM
OFF
1).
VCR1 VCR2
TUNER TV CONT
BAND DIRECT ACCESS
2
3 8 Press REMOTE SETUP.
- +
STATION
4 ¢
The REMOTE SET UP menu appears on your TV screen.
- +
CHANNEL
2 3
5 6
8 9
EXIT
0 ENTER
DISC
TV
VOLUME
TV FUNC
MENU MUTE
FUNCTION
ENTER You have four set up options:
SIGNAL
1 PRESET RECALL
SELECT
2/dts
2 LEARNING
ADVANCED STANDARD
3 MULTI OPERATION (See p.65)
DSP STEREO
DIGITAL NR
4 DIRECT FUNCTION (See p.68)
PRESET RECALL and LEARNING are the two modes that teach the
remote control to operate your other components. It's easiest to
start with PRESET RECALL and, if set up isn't possible, move on to
the LEARNING mode.
3
Press REMOTE SETUP and
select the PRESET RECALL SETUP mode.
All the MULTI CONTROL BUTTONS (except the TUNER button)
start to blink.
To cancel the PRESET RECALL SETUP mode
Press REMOTE SET UP.
Select Remote
Setup Mode
Remote SETUP+1
Preset Recall
Remote SETUP+2
Learning
Remote SETUP+3
Multi-Operation
Remote SETUP+4
Direct Function
at the same time to
1