Dc Bus Bar Assembly; Heat Sink Fan Assembly - Trane TR150 Service Manual

I-Frame Size Disassembly an...

8.4.9 DC Bus Bar Assembly

1. Remove 2 screws (T30) from each of the 2
snubbers.
2. Remove the snubbers.
3. Loosen and remove the 2 cables from bus bar
assembly and DC coil.
4. Remove 2 screws (T30).
5. Remove 8 screws (T20) on top of the bus bar
assembly.
6. Remove the bus bar assembly.
Reinstall in the reverse order.
1 Bus bar assembly
Illustration 8.32 DC Bus Bar Assembly
BAS-SVM04B-EN
TR150 and TR170 Service Manual

8.4.10 Heat Sink Fan Assembly

1.
2.
3.
4.
Reinstall in the reverse order.
1 Fan cover plate
2 Heat sink fan
Illustration 8.33 Heat Sink Fan Assembly
02/2017 All rights reserved.
Remove 4 screws (T20) from the heat sink fan
assembly.
Push the cables down through the gaskets.
Carefully press the gaskets down with a
screwdriver.
Remove the fan assembly.
8 8
91