H-Frame Size Disassembly a...
7.4.9 DC Coil
1.
Remove the 4 screws (T20) from the DC coil cover
plate.
2.
Remove the 4 screws (T20) from the heat sink.
3.
Remove the heat sink.
4.
Remove 4 screws (T20) from each of the 2 DC
Coils.
5.
Remove the coils.
Reinstall in the reverse order.
1
DC coil cover plate
2
Heat sink
3
DC coil
Illustration 7.14 DC Coil
BAS-SVM04B-EN
TR150 and TR170 Service Manual
7.4.10 Capacitor Bank
1.
2.
3.
4.
5.
6.
7.
8.
Reinstall in the reverse order.
1
Foil
2
Base plate
3
Capacitor bank
Illustration 7.15 Capacitor Bank
02/2017 All rights reserved.
Remove the foil.
Remove the 6 screws on the base plate.
Remove the base plate.
Remove the 4 screws (T20) from the capacitor
mounting plate.
Remove the mounting plate.
Turn the capacitor bank upside-down.
Remove the hex nut with a hex 19 key.
Remove the capacitor.
7
7
65