I-Frame Size Disassembly an...
8.4.5 Bus Bar
1.
Unplug and remove the red/black cable.
2.
Remove the black plastic cover.
3.
Remove 6 screws (T20) and 2 screws (T30) from
the support bracket.
4.
Remove the bus bar assembly.
Reinstall in the reverse order.
1
Bus bar
Illustration 8.28 Bus Bar
BAS-SVM04B-EN
TR150 and TR170 Service Manual
8.4.6 RFI Filter
1.
2.
3.
4.
5.
6.
Reinstall in the reverse order.
1
RFI filter
Table 8.1
Illustration 8.29 RFI Filter
02/2017 All rights reserved.
Unplug the 3 filter cables from the thyristors
using a hex 8 key.
Loosen the 3 cables from the cable connector
using a hex 5 key.
Remove 3 screws (T20) from the support bracket.
Remove support bracket.
Remove 4 screws (T20) from the RFI filter.
Remove the entire assembly.
8
8
89