Table of Contents
Advertisement
System Setup
Effect Setup
This operation is used to determine whether parameter changes you make to
the effects are saved (BACKUP) or not saved (DEFAULT).
When set to "DEFAULT", the parameter for each effect returns to its default value
the next time you switch the SH-01's power ON.
1
Press and hold the [DISPLAY/MENU] button to display the system setup menu ("MENU"
appears on the top half of the display).
2
Use the [–]/[+] buttons to display "EFFECT SETUP" on the bottom half of the display, then
press the [ENTER] button.
MENU
EFFECT SETUP -/+,ENT
3
The effect setup display appears.
EFFECT SETUP:
DEFAULT
4
Use the [–]/[+] buttons to select either "DEFAULT" or "BACKUP".
EFFECT SETUP:
DEFAULT
BACKUP
5
Press the [ENTER] button to appoint the setting and return to the main display.
40
-/+,ENT
-/+,ENT
Advertisement
Table of Contents
