Table of Contents
Advertisement
Using the SH-01
Adjust the INPUT volume as high as possible so that the PEAK lamp does not light red.
3
Press the [REC] button to enter the Record Standby mode, and check the amount of time
available for recording.
* If there is not enough time available for recording, either select another recording mode
delete any unnecessary files
4
Press the [W/A] button to start recording.
Sing into the built-in microphones.
* Using too much force to press the [W/A] buttons to start/stop recording may result in recording of the
sound made by the button being pressed. Press the buttons gently.
5
After you are finished singing, press the [W/A] button to stop recording.
The file you just recorded is automatically given a name, and the display shows that the
data is saved in the memory card.
18
MEMORY FREE
01/01 NEW
(→page 32,
File number
Total number of files in the memory card
01/01
SONGå001
File name
06:38
¨
33), or use a memory card that has more available capacity.
´
UNDO mark
01:26¨
Total time of the selected file
PEAK lamp
Time available for
recording
(→page
38),
Advertisement
Table of Contents
