Table of Contents
Advertisement
Using the SH-01
3
Adjust the audio balance between the guitar you recorded in the original file, and the vocal
that will be mixed with the guitar.
First, press the [W/A] button to start playback of the original file.
Press the [DISPLAY/MENU] button to enter the level display mode, and singing along with
the playback, adjust the volume of the original file (PLAY volume) and the volume of the
vocal mic (INPUT volume). We recommend that a pair of headphones be used for monitor-
ing.
4
Of course you can also apply effects to your vocal part. Use the same procedure described
3
in steps
The settings for recording your vocal part are now complete.
But before mix recording the vocal part, let's rehearse by singing along with the previ-
ously recorded guitar part.
5
Repeat playback has two modes.
• Single Repeat ........ This repeats the playback of a single song in its entirety.
• AB Repeat .............. This repeats the playback of the selected segment within the song.
To use the Single Repeat
Press the [W/A] button to start file playback, then press and hold the [REPEAT] button
(Single Repeat setup display). Use the [–]/[+] buttons to cancel the repeat.
26
Vocal microphone
volume
4
and
on
page 20
and
Original file
volume
21
to set.
SINGLE REPEAT⁄¤__‹›
SONGå002
The name of the file being single repeated.
03:12
Advertisement
Table of Contents
