Table of Contents
Advertisement
Nomenclature
@2
VOLUME
Controls the volume of the SH-01's built-in
speakers and the output signal level deliv-
ered via the LINE OUT/PHONES jack.
(→ page 14)
@3
LINE OUT/PHONES Jack
This miniature stereo jack can be used to
connect the output of the SH-01 to an audio
system, mixer, etc., or connect a pair of ste-
reo headphones for monitoring.
@4
LINE IN Jack
This miniature stereo jack is used to con-
nect a line device such as a CD player, MD
player, etc., to the SH-01.
@5
INST. Jack
This standard monaural jack can be used
to connect an electric instrument such as
an electric guitar, or a vocal microphone to
the SH-01. The instrument's output level
can be adjusted with the GAIN switch @6 .
@6
GAIN Switch (HIGH/LOW)
Switches the gain of the internal micro-
phone and INST. jack @5 .
10
@5
@6
@7 @8
@2 @3 @4
@9
#0
@7
INTERNAL MIC Switch (ON/OFF)
Switches the built-in microphone ON/OFF.
* The internal speakers will not sound when
the INTERNAL MIC switch
ON, or when a plug is plugged into the
LINE OUT/PHONES jack
@8
PICKUP MIC Jack
This miniature monaural jack is used to con-
nect a condenser microphone (DC2V) to the
SH-01.
This is a powered jack that delivers a DC
2V to the pickup mic via the connected plug.
This jack allows the direct connection
of a Yamaha MC7 Wind Instrument
Pickup to the SH-01.
@9
POWER Switch (ON/STANDBY)
This is the SH-01's power switch.
#0
DC IN (Power Adaptor) Jack
If you use the power adaptor (PA-3C) to
power the SH-01, connect it to this jack.
#1
USB Port
This port is used to connect the SH-01 di-
rectly to a computer.
#1
@7
is switched
@3
.
(→ page 16)
Advertisement
Table of Contents
