Table of Contents
Advertisement
u
PAUSE Button (D)
Press this button during playback to momen-
tarily stop playback.
i
MIX Button ( )
(This button is used to record an overdub.)
Press this button and the unit goes into mix
recording standby mode.
o
ENTER Button (
Press this button to Start/Stop both playback
and recording functions.
This button is also used to enter the selected
menu, and to carry out and set settings.
!0
ESCAPE Button
Press this button if you want to cancel the
setting and return to the display previous to
the one you are currently in.
!1
SELECT Button
This button is used to advance through menu
or parameter selections when the setting
contains multiple items.
!2
–/+ Buttons (
E
These buttons are used to skip to the next
or previous file (song). They can be used
either during playback or while playback is
stopped. Press and hold the buttons to fast-
forward or fast-rewind the song.
The buttons are also used to change param-
eter values or to carry out/cancel the set-
ting.
!3
DISPLAY/MENU Button
Press this button to switch from one display
mode to the next.
Press and hold the button to display the sys-
tem setup menu.
!4
REPEAT Button
This button is used to repeat playback of a
song (file).
The SH-01 has two types of repeat. Single
repeat is used to repeat the current song in
its entirety, and AB repeat is used to repeat
a defined segment within the song.
(→ page 26)
/
)
W
A
/
)
R
(→ page 25)
!5
PAN Button
This button is used to access the setting to
adjust the stereo volume balance.
(→ page 21)
!6
EFFECT Button
This button is used to access effect settings.
(→ page 20)
!7
TUNER Button
This button is used to activate the SH-01's
built-in tuner mode.
!8
UNDO/DELETE Button
This button is used to cancel the previous
operation in which the data in the memory
was changed.
(→ page 19)
You can also press and hold the button to
delete the currently selected file.
(→ page 32)
!9
METRONOME Button
This button switches the metronome ON/
OFF, and sets the metronome tempo or op-
erating mode.
(→ page 22)
@0
Built-in Speakers
These are the unit's built-in stereo speak-
ers.
* The speakers will not sound when the INTER-
NAL MIC switch
a plug is plugged into the LINE OUT/
@3
PHONES jack
@1
Card Slot (3.3V CARD)
This slot accepts a standard SmartMedia
memory card, which is used for data stor-
age.
(→ page 12)
Nomenclature
(→ page 24)
@7
is switched ON, or when
.
TM
9
Advertisement
Table of Contents
