Setting / Changing The Camera Channel - Swann Wireless OutdoorCam SW231-WDC Operating Instructions Manual

Setting / Changing the Camera Channel

The Wireless OutdoorCam operates in the 2.4GHz frequency range. It is capable
of transmitting on 4 channels. Follow the steps below to set or change the fre-
quency channel of the camera.
2
Locate the 2 dip switches
under the rubber fl ap
Set the camera channel as per the switch confi guration below. Do
4
not set multiple cameras on the same channel or interference will
appear on screen
1
Channel 1 Channel 2
1 2 1 2
Pull open the rubber fl ap on
the camera's power cable
Use the Dip Switch Tool to fl ip
3
the switches to change the
camera's transmitting channel
Channel 3 Channel 4
1 2 1 2
7 7