HP 6125XLG Command Reference Manual page 148

undo archive configuration location
Default
No configuration archive directory or configuration archive file name prefix has been set.
Views
System view
Predefined user roles
network-admin
Parameters
directory: Specifies a configuration archive directory, a case-insensitive string of 1 to 63 characters. The
directory must take the format storage-medium-name:/folder-name. This directory must already exist on
the master, and its directory name must not include member ID information.
filename-prefix: Specifies a file name prefix for configuration archives, a case-insensitive string of 1 to 30
characters. Valid characters are letters, digits, underscores (_), and hyphens (-).
Usage guidelines
Before archiving the running configuration, either manually or automatically, you must configure a
directory and file name prefix for configuration archives.
In an IRF fabric, the configuration archive function saves the running configuration only on the master
device. To make sure the system can archive the running configuration after a master/subordinate
switchover, create the directory on all IRF members.
Configuration archives take the file name format prefix_serial number.cfg, for example,
20080620archive_1.cfg and 20080620archive_2.cfg. The serial number is automatically assigned from
1 to 1000, increasing by 1. After the serial number reaches 1000, it restarts from 1.
After you change the file directory or file name prefix, or reboot the device, all of the following events
occur:
The old configuration archives are regarded as common configuration files.
•
The configuration archive counter is reset.
•
• The display archive configuration command no longer displays the old configuration archives.
The serial number for new configuration archives starts at 1.
•
The undo archive configuration location command removes the configuration archive directory and file
name prefix settings. The command also completes the following operations at the same time:
Disables the configuration archive function (both manual and automatic methods).
•
Restores the default settings of the archive configuration interval and archive configuration max
•
commands.
• Clears all configuration archives.
Examples
# Configure the configuration archive directory as flash:/archive and the archive file name prefix as
my_archive.
<Sysname> mkdir flash:/archive
Creating directory flash:/archive... Done.
<Sysname> system-view
[Sysname] archive configuration location flash:/archive filename-prefix my_archive
140