Display Transceiver Manuinfo - HP 6125XLG Command Reference Manual

Field
Transfer Distance(xx)
Digital Diagnostic
Monitoring
Ordering Name

display transceiver manuinfo

Use display transceiver manuinfo to display the electronic label information of transceiver modules.
Syntax
display transceiver manuinfo interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface [ interface-type interface-number ]: Specifies an interface by its type and number. If no interface
is specified, this command displays the electronic label information of the transceiver modules on all
interfaces.
Usage guidelines
This command displays only part of the electronic label information.
Examples
# Display
Ten-GigabitEthernet1/1/5.
<Sysname> display transceiver manuinfo interface ten-gigabitethernet 1/1/5
Ten-GigabitEthernet1/1/5 transceiver manufacture information:
Manu. Serial Number
Manufacturing Date
Vendor Name
Description
Transfer distance, with "xx" representing the distance unit: km (kilometers) for
single-mode transceiver modules and m (meters) for other transceiver modules.
If the transceiver module supports multiple transfer media, the transfer distances are
separated by commas. The transfer medium is included in the bracket following the
transfer distance value. The following are the transfer media:
•
9 um—9/125 um single-mode fiber.
•
50 um—50/125 um multi-mode fiber.
•
62.5 um—62.5/125 um multi-mode fiber.
•
TP—Twisted pair.
Support for the digital diagnosis function:
•
YES—Supported.
•
NO—Not supported.
Product code.
the electronic label
: 213410A0000054000251
: 2012-09-01
: HP
information of the
215
transceiver module in interface