Directory flash:/1 removed.
Related commands
•
delete
dir
•
•
mkdir
shutdown
Use shutdown to shut down the management Ethernet port.
Use undo shutdown to bring up the management Ethernet port.
Syntax
shutdown
undo shutdown
Default
The management Ethernet port is up.
Views
Management Ethernet port view
Usage guidelines
When the management Ethernet port is not operating correctly, you can shut it down and then bring it up.
Examples
# Shut down the management Ethernet port.
<boot> system-view
[boot] interface m-eth0
[boot-m-eth0] shutdown
# Bring up the management Ethernet port.
[boot-m-eth0] undo shutdown
ssh2
Use ssh2 to log in to an SSH server.
Syntax
ssh2 { server-ipv4-address | ipv6 server-ipv6-address }
Views
User view
Parameters
server-ipv4-address: Specifies the IPv4 address of the SSH server in dotted decimal notation.
ipv6 server-ipv6-address: Specifies the IPv6 address of the SSH server.
Usage guidelines
If the SSH server does not respond, you can press Ctrl+C to abort the login attempt and try again later.
188