HP 6125XLG Command Reference Manual page 166

main: Specifies the configuration file as the main next-startup configuration file. This is the primary
configuration file that the device attempts to load at startup. If the loading attempt fails, the device tries
the backup next-startup configuration file.
Usage guidelines
CAUTION:
In an IRF fabric, use the undo startup saved-configuration command with caution. This command can
cause an IRF split after the IRF fabric or an IRF member reboots.
In an IRF fabric, the startup saved-configuration command applies to all IRF members. To successfully
configure the command, verify that the specified file already exists in the root directory of the flash
memory on each member.
If neither backup nor main is specified, the startup saved-configuration command specifies the main
next-startup configuration file.
Even though the main and backup next-startup configuration files can be the same one, specify them as
separate files for high availability.
The undo startup saved-configuration command changes the file attribute of the main and backup
next-startup configuration files to NULL, but it does not delete the two configuration files.
You can also specify a configuration file as a next startup file when you use the save command to save
the running configuration to it.
Examples
# Specify the main next-startup configuration file.
<Sysname> startup saved-configuration testcfg.cfg
Please wait ....
... Done.
Related commands
display startup
158