Display Current-Configuration Diff - HP 6125XLG Command Reference Manual

password hash
$h$6$zSWYxJ3Oj01iR7x1$a5BIEHfcqTUKrVkd6HB9vVLh8abWLm9sy/FW8J0ypdnqtH/Du6IU+9UlM8W5OM+
ihHJAWXUkTEAoMuJKBwcogw==
service-type ssh telnet terminal
authorization-attribute user-role network-admin
#
return
# Display Ethernet interface configuration.
<Sysname> display current-configuration interface ten-gigabitethernet 1/1/5
#
interface Ten-GigabitEthernet1/1/5
port link-mode route
#
return

display current-configuration diff

Use display current-configuration diff to display the configuration differences between the current startup
configuration file and the next-startup configuration file.
NOTE:
This command is available in Release 2406P03 and later versions.
Syntax
display current-configuration diff
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
This command compares the current startup configuration file with the next-startup configuration file in
the following steps:
1. Compares the current startup configuration file with the main next-startup configuration file.
2. If the main next-startup configuration file is unavailable or corrupt, this command compares the
current startup configuration file with the backup next-startup configuration file.
If both the main and backup next-startup configuration files are unavailable or corrupt, the system
prompts that the next-startup configuration file does not exist.
Examples
# Display the configuration differences between the current startup configuration file and the next-startup
configuration file.
<TEST1>display current-configuration diff
--- Startup configuration
+++ Current configuration
146