Tftp Ipv6 - HP 6125XLG Command Reference Manual

Syntax
tftp client source { interface interface-type interface-number | ip source-ip-address }
undo tftp client source
Default
No source IPv4 address is configured for outgoing TFTP packets. The device uses the primary IPv4
address of the output interface for the route to the server as the source IP address.
Views
System view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies the source interface for establishing TFTP
connections. The primary IPv4 address of the source interface is used as the source IPv4 address for
packets sent to a TFTP server. Make sure the interface is up and has the primary IPv4 address configured.
Otherwise, the transmission fails.
ip source-ip-address: Specifies the source IPv4 address for outgoing TFTP packets. It must be the IPv4
address of an interface in up state. Otherwise, the transmission fails.
Usages guidelines
If you execute this command multiple times, the most recent configuration takes effect.
The source address specified with the tftp command takes precedence over the source address specified
with the tftp client source command.
The source address specified with the tftp client source command applies to all TFTP connections. The
source address specified with the tftp command applies only to the current TFTP connection.
Examples
# Specify the source IP address of sent TFTP packets as 192.168.20.222.
<Sysname> system-view
[Sysname] tftp client source ip 192.168.20.222
Related commands
tftp

tftp ipv6

Use tftp ipv6 to download a file from a TFTP server or upload a local file to a TFTP server in an IPv6
network.
Syntax
tftp ipv6 tftp-server [ -i interface-type interface-number ] { get | put | sget } source-filename
[ destination-filename ] [ vpn-instance vpn-instance-name ] [ dscp dscp-value | source { interface
interface-type interface-number | ipv6 source-ipv6-address } ] *
Views
User view
115