Display Device Manuinfo - HP 6125XLG Command Reference Manual

<Sysname> display device
Slot 1
SubSNo PortNum PCBVer
0 20
1 12
Slot 2
SubSNo PortNum PCBVer
0 20
1 12
The output shows that the IRF fabric has two member devices, and each member has 55 Ethernet
interfaces.
Table 31 Command output
Field
Slot 1
SubSNo
PortNum
PCBVer
FPGAVer
CPLDVer
BootRomVer
AddrLM
Type
State

display device manuinfo

Use display device manuinfo to display the electronic label information of the device.
Syntax
display device manuinfo [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. Without this option, the command
displays the electronic label information of all IRF member devices.
FPGAVer CPLDVer
Ver.A NULL 003
Ver.A NULL 003
FPGAVer CPLDVer
Ver.A NULL 003
Ver.A NULL 003
Description
Hardware information about IRF member device 1.
Subslot number. For the internal Ethernet port, the subslot number is 0. For the
external Ethernet port, the subslot number is 1.
Maximum number of ports that the switch supports.
PCB version of the switch.
FPGA version of the switch.
CPLD version of the switch.
BootWare version of the switch.
Address learning mode.
Type of the switch.
Status of the switch.
BootRomVer AddrLM Type
103 IVL
103 IVL
BootRomVer AddrLM Type
103 IVL
103 IVL
203
State
Back Plane Normal
Front Plane Normal
State
Back Plane Normal
Front Plane Normal