Setting The Color Mode - Pioneer PDP-501MX Technical Manual

4) Setting the Colour Mode
In addition to normal color mode (COLOUR MODE 1), this unit also provides a COLOUR MODE 2, with PICTURE and
WHITE BALANCE parameters preset for maximum performance in picture reshooting in TV studios. Use the mode
appropriate for the situation.
This unit is factory preset to COLOUR MODE 1.
1 Enter Integrator mode (refer to "5.4.1 About Integrator
Mode").
The ID number of the set of adjustment items will be
indicated in the upper right corner of the screen where "– –
" is displayed in the illustaration.
Select ADDITIONAL SET UP.
2 Move the cursor to COLOUR MODE and select the desired
color mode with the SET button.
Pressing the SET button toggles the color mode between 1
and 2.
COLOUR MODE affects every input (INPUTs 1-4) without
exception. All inputs are immediately switched to the same
color mode when a selection is made in step 3.
Select EXIT in screen 2 to return to screen 1.
NOTE: The current COLOUR MODE can be identified by the ID display color.
Cyan: COLOUR MODE 1
White: COLOUR MODE 2
Integrator Mode
Screen 1
MENU
PICTURE
WHITE BALANCE
]
SCREEN
3ADDITIONAL SET UP
TOTAL INITIALIZE
Screen 2
ADDITIONAL SET UP
3COLOUR MODE : 1
BAUD RATE :
]
HOUR METER : 00123
MIRROR MODE : OFF
STD-RGB : OFF
SIDE MASK ADJ.
EXIT
– –
– –
4800BPS
91