Pioneer PDP-501MX Technical Manual page 108

RS-232C Adjustment Mode
3) <GET> (GET STATUS) — The status of various settings is transmitted in the following formats:
• Output items
(1) STX (02H)
(2) Version of microcomputer software (5 bytes) [5435A]
(3) Input function status
(4) Color-mode setting status
(5) Full auto zoom setting status
(6) Screen-size setting status
(7) Auto power off setting status
(8) 3-dimensional Y/C Separator Setting Status
(9) COLOUR SYS Setting Status
(10) Status of connected equipment settings and input signal format settings
(11) Clamp position setting status
(12) ABL setting status
(13) MP mode setting status
(14) KEY LOCK/UNLOCK
(15) OSD display setting status
(16) Mirror mode setting status
(17) Dummy data
(18) STD-RGB setting status
(19) ETX (03H)
NOTES: • Refer to P.74 to P.94 and P.113 for the setting for each item.
• When the input function is INPUT 1, the dummy data is issued for:
(10) Status of connected equipment settings and input signal format settings
(11) Clamp position setting status
(12) ABL setting status
(13) MP mode setting status
• When the input function is INPUT 2, or INPUT 3 or 4 and in the VIDEO setting, the dummy data is issued for:
(8) 3-dimensional Y/C separator setting status
(11) Clamp position setting status
(12) ABL setting status
(13) MP mode setting status
• When the input function is INPUT 3 or 4 and in the PC setting, the dummy data is issued for:
(8) 3-dimensional Y/C separator setting status
108
[Example of output] = Setting status when the signals to the
(3 bytes) [IN1]
(3 bytes) [CM1]
(3 bytes) [AZN]
(3 bytes) [SM2]
(3 bytes) [APN]
(3 Bytes) [ YCM]
(3 Bytes) [TVA]
(3 bytes) [BBY]
(3 bytes) [CL1]
(3 bytes) [ABY]
(3 bytes) [MPY]
(3 bytes) [KLN]
(3 bytes) [DIN]
(3 bytes) [MMZ]
(3 bytes)
(3 bytes) [NRY]
left are issued
= Version A
= INPUT 1
= COLOUR MODE 1
= Full Auto Zoom: OFF
= Screen-Size Setting: FULL
= Auto Power Off: OFF
= 3D Y/C MODE: MOTION
(For U.S. models and Taiwanese models)
= COLOUR SYS: AUTO
(For EURO models only)
= INPUT SETTING: VIDEO; SIGNAL: RGB
= CLAMP: MODE 1
= ABL: ON
= MP: ON
= UNLOCK (available either from the remote
or the operating panel of the main unit)
= OSD not displayed
= MIRROR MODE: XY
= STD-RGB: ON