Methods for Securing: Basic methods for securing are shown below.
Avoid blocking or covering areas, aside from those indicated by (
with cross-hatching should be avoided. Before attaching the unit to fittings, double-check that
the thickness and height of the fittings and the number of fixing bolts is correct. (Also refer to
3.4.1 Mounting to Fittings)
More than 700 mm
More than 700 mm
Temperature Measurement Points (Informative)
• Make measurements at a distance 5 cm from the unit, without directly subjecting the thermometer to fan exhaust.
• For spaces where temperature fluctuations are likely, gather additional measurement points for an adequate data set.
Special Installation (Embedding in the wall)
). The method indicated
50mm
50mm
31