Auto Power Off - Pioneer PDP-501MX Technical Manual

Menu Mode
4) Auto Power-Off
This features automatically switches power to standby when no video signal is detected for at least eight minutes.
Setting AUTO POWER OFF to ON activates this function.
1 Select AUTO POWER OFF.
Screen 1
MAIN MENU
PICTURE
V MEMORY
SCREEN
RESET

3AUTO POWER OFF

SET UP
MENU : MENU OFF
5∞ : SEL.
• Changing the current AUTO POWER OFF setting in step 2 enables the new setting for all inputs.
• Factory preset: OFF
NOTE: To switch on power to the unit again, press the power switch on the remote or the operating panel of the
main unit. (No function is provided for automatic power-on on detection of a video signal.)
76
SET : NEXT
2 Move the cursor to SETTING and change the setting
using the SET button.
Pressing the SET button toggles AUTO POWER
OFF ON or OFF.
Screen 2
AUTO POWER OFF
3SETTING : ON
EXIT
∞ : SEL.
SET : CHANGE