Pioneer PDP-501MX Technical Manual page 25

4) Arranging and securing cables with speed clamps and bead bands
1
Fasten cables using the supplied speed clamps.
Remember that speed clamps are not
easily removed, once fastened.
2
Secure cables with the supplied bead bands.
• Cables may also be drawn around to the right, viewed from
this side.
1
Secure cables with speed
clamps.
1
Insert part 1 into an opening in
the rear cover, then insert part 2,
as shown.
Fastening points for speed clamps
2
Bundle cables using
bead bands.
2
Bundled cables can be
drawn to the left or right.
Depending on specific
requirements, you may use
the four openings indicated
by solid circles (¶).
How to unlock the speed clamp
Use a pair of pliers to twist
the clamp by at least a
quarter-turn and pull
outward. Remember that this
procedure entails risk of
damaging the clamp.
Installation Procedures
* Display viewed from the rear.
Cords
25