Setting The Color System - Pioneer PDP-501MX Technical Manual

8) Setting the Colour System (For EURO models)
Normally the colour system is used in its AUTO mode. However, if no proper image or no colour is delivered, change
the mode, as follows.
1 Select SET UP.
Screen 1
MAIN MENU
PICTURE
V MEMORY
SCREEN
RESET
AUTO POWER OFF
3SET UP
MENU : MENU OFF
5
: SEL.
• Set-able condition: Composite signals incoming via INPUT 1
• Factory preset: AUTO
SET : NEXT
2 Move the cursor to COLOUR SYS, and press the
SET button to change the setting.
Repeatedly pressing the SET button offers the
following options in sequence:
AUTO = NTSC = PAL = SECAM = 4.43 NTSC
Screen 2
SET UP
3COLOUR SYS : AUTO
EXIT
∞ : SEL.
SET : CHANGE
Menu Mode
81