Toyota Lexusc Owner's Handbook Manual page 513

STARTING AND DRIVING
(d) Selecting the easy access mode
"
1 Easy access mode switch
Easy access mode indicator light
2
To select the easy access mode, push the easy access
mode switch. The easy access mode indicator light
comes on.
When the engine is stopped, the vehicle height changes
automatically to the easy access mode. The indicator light
blinks while the height changes. When the vehicle height
reaches the easy access mode, the indicator light turns off.
This mode is available when "N" or "LO" mode is selected.
When the engine is restarted in the easy access mode, the
easy access mode indicator light blinks. When the vehicle
begins to run or you push the height select switch to change the
mode, the indicator light will remain on.
494
When the vehicle's speed exceeds approximately 12 km/h (8
mph) in the easy access mode, the "N" (normal) mode is
automatically selected.
The "N" indicator light blinks while the vehicle height changes.
When the vehicle's height reaches the "N" mode, the indicator
light remains on.
To cancel the easy access mode, push the easy access mode
switch once again. The indicator light will turn off.
When the engine is restarted after being stopped, easy access
mode is cancelled and "N" (normal) mode is automatically
selected.