Toyota Lexusc Owner's Handbook Manual page 271

OCCUPANT RESTRAINT SYSTEMS
To make only slight changes to an already memorized position,
the easiest way is to first activate the memorized position, then
make the desired changes and perform step 2 above.
Recalling the memorized position
When you push button "1" or "2", the driving position will
be automatically adjusted to the position recorded for that
button.
252
Conditions for memorized position activation
D Ignition key "ON" and selector lever in "P" position.
All parts of the memorized positions can be activated.
D Key not in ignition switch and within 30 seconds of opening
driver's door.
The memorized position can be activated, except for the tilt
and telescopic steering.
If any driving position memory switch is pushed while one of the
memorized driving position profiles is being activated, the
operation will stop.
To activate the system, push the desired button ("1" or "2")
again.
The driving position memory control system cannot be
operated while the vehicle is moving.
If the vehicle's battery is disconnected, the computer's
memory will be erased and the memorized positions will have
to be set again.