Presser Feet - Husqvarna Viking SAPPHIRE 9650Q User Manual

PRESSER FEET

7
7
7
7
7
1:8
Utility Foot A
Snapped onto the machine upon delivery. This foot is used mainly for straight stitching and
zigzag stitching with a stitch length longer than 1.0.
Decorative Stitch Foot B
Use this foot for sewing close zigzag stitches (satin stitches) with less then 1.0 mm stitch length
and decorative stitches.The tunnel on the underside of the foot is designed to feed smoothly
over the stitches.
Buttonhole Foot C
For manual buttonholes. This foot has guide lines to determine buttonhole length. The middle
measures a 5 / 8 '' (15 mm) from the fabric edge. The two tunnels on the underside of the foot
ensure a smooth feed over the buttonhole columns. The finger on the back of the foot holds
cording for corded buttonholes.
Blindhem Foot D
This foot is used for blindhem stitches. The inner edge of this foot guides the fabric. The right
toe of the foot is designed to ride along the hem edge.
Zipper Foot E
This foot can be snapped on either to the right or to the left of the needle. This makes it easy to
sew both sides of the zipper. Move needle position to right or left to sew closer to zipper teeth
or for covering large cording.
Non-Stick Glide Foot H
This foot has a non-stick coating on the underside. It is used when sewing foam, vinyl, plastic or
leather to keep the material from sticking to the foot.
Edging Foot J
This foot is used for overcasting and seam/overcasting, with stitches that have a stitch width of
5.0 and 5.5 mm. Stitches form over the pin which prevents puckering at the edge of the fabric.