Sewing Pop-Up Messages - Husqvarna Viking SAPPHIRE 9650Q User Manual

FREE MOTION STIPPLING
You will have to move the fabric manually.
1. Touch needle stop up/down to select the needle down
position.
2. Sew at a constant medium speed, moving the fabric
randomly. Try drawing squiggles with the needle as you
sew. Free motion stippling is usually a random wavy
stitching that should be fairly close together but not
crossing. The stitching should look like puzzle pieces.
Tip: Use the optional Open Toe Stippling Foot for better visibility
when free motion stippling.
Note: To set the machine to regular sewing touch the Freemotion icon
and deselect the Free Motion setting.

SEWING POP-UP MESSAGES

Bobbin Thread Low
When the bobbin thread is running low, a pop-up message
appears giving you an advanced notice that you'll soon need
to change the bobbin. This gives you an opportunity to
plan when you want to change your bobbin. If you want
to continue sewing just touch the foot control without
touching the ok in the pop-up.
Remove Sensor One-Step Buttonhole Foot
The Sensor One-Step buttonhole foot is used only for
buttonholes. A pop-up message will advise you to remove it
for all other sewing.
Machine needs to rest
If the machine stops and this pop-up appears on the
screen, the machine needs to rest. When the OK icon is
enabled you can resume sewing. The sewing results will not
be affected.
4:18
1:1 Free Motion Stippling
Fabric: Woven medium with
batting underneath.
Select: Woven medium on The
Exclusive SEWING ADVISOR
®
Straight Stitch 1, FreeM Floating in
the Sewing Information tab.
Use: Presser Foot R and size 80
needle as recommended.
,