To Re-Load A Stitch Program - Husqvarna Viking SAPPHIRE 9650Q User Manual

TO RE-LOAD A STITCH PROGRAM

Once you have finished making your program and touch
OK, it will be loaded and is ready to be sewn. If selecting
another stitch and then re-opening the Program mode, your
stitch program will remain unchanged. Every time Program
mode is closed, the stitch program will be loaded and ready
to be sewn.
You can also load a previously saved program from the
U-menu and make changes to the programmed stitch in
Program mode.
Note: If the machine is turned off the program disappears from the
Program Mode. Remember to save your program before turning the
machine off.
PROGRAM POP-UP MESSAGES
Not a Programmable Stitch
Some stitches are not possible to insert in a stitch program,
for example buttonholes.
Stitch Program Out of Range
The stitch you are trying to add will make the stitch
program too long.
Your stitch program cannot exceed 500mm (20") long
or contain more than 99 stitches. If the stitch program
exceeds the maximum length or amount of stitches, this
pop-up message will let you know.
P 5:5
rogram