Overcast - Husqvarna Viking SAPPHIRE 9650Q User Manual

OVERCAST

Overcast fabric edges to prevent fraying and to help
them lay flat. It is easiest to overcast before the garment
is sewn together. Presser foot J is recommended for light
and medium weight fabric to prevent puckering along the
edge. Presser foot B is used for heavy weight fabric. Your
Exclusive SEWING ADVISOR
best stitch length and stitch width for the fabric weight and
recommend the presser foot and needle.
: Woven medium.
FABriC
: Woven medium fabric and Overcast technique. (The
seleCt
Exclusive SEWING ADVISOR
step Zig Zag stitch.)
: Presser foot J and size 80 needle as recommended.
use
Place the edge of a single thickness of fabric under presser
foot J with the wire guide along the edge of the fabric. The
three-step Zig Zag stitch sews over the wire guide to keep
the edge of the fabric flat.
:
sew
• Step on the foot control. The presser foot lowers
automatically.
• Sew to overcast the edge of the fabric.
• Touch the Selective Thread Cutter.
Note: It is not necessary to overcast leather or vinyl because they do
not fray. However, the Exclusive SEWING ADVISOR
allows you to, if desired. Select Leather/Vinyl fabric and Overcast
technique on your Exclusive SEWING ADVISOR
(The Exclusive SEWING ADVISOR
stitch).
4:10
feature will select the
™
feature selects a three-
™
feature
™
feature.
™
feature selects a Zig Zag
™
7