Alt And Function Arrows; Stitch Altering - Husqvarna Viking SAPPHIRE 9650Q User Manual

STITCH ALTERING

Your machine will set the best settings for each selected
stitch. You can make your own adjustments on the selected
stitch. The setting changes will only affect the selected
stitch. Your changed settings will be reset to default when
selecting another stitch. The changed settings are not
automatically saved when turning your machine off. You
can save an adjusted stitch in a My Stitches to keep the
adjustments.

ALT and function arrows

The ALT icon is used to change the functions connected to
the arrows. When you touch ALT, one or both icons next
to the arrows will change. Touch ALT again to change back
Stitch Length
to the original icons. Below you will find a description of
the different icons that can appear when selecting a stitch.
Stitch Width
Decrease or increase the stitch width using the arrows below
the stitch width icon. Default settings are shown in black
Stitch Width
numbers, adjusted settings in red.
Stitch Length
Increase or decrease the Stitch Length using the arrows
next to the Stitch Lenght icon. If lengthening a Zig Zag
stitch or a decorative stitch, the entire stitch will be longer.
If lengthening a satin stitch where the density can be
Stitch length - Stitch length +
adjusted, the entire stitch will be longer but the density will
remain the same.
Note: When trying to exceed minimum or maximum settings for
width and length, a warning sound will be heard. The default setting
is shown in black. Changed settings are shown in red.
Stitch Positioning
Use the arrows below to move the stitch to the right or to
the left when using a straight stitch. The machine has a
maximum of 29 needle positions (for a straight stitch).
When ALT function is selected on a stitch that has width
position, the stitch can be moved right or left. The stitch
position can only be changed to the limit of the maximum
stitch width. Changing the stitch position will also limit the
stitch width adjustment. Stitch Density
Stitch Density
Use the arrows beside the stitch density icon to adjusts the
density (the distance between the individual satin stitches
Stitch Positioning
that make up the entire stitch). The density does not affect
the actual length of the complete stitch.
Touch the arrows to increase or decrease the value.
Note: Adjust the density when sewing with thicker thread or sewing
with specialty threads and when a less or more dense satin stitch is
Stitch density + Stitch density -
desired.
S 4:5
ewing